TAP-T750MV2T02300BG glass tube fuse

{title} is a {keywords} product model of Walter. {keywords} is widely used and covers a variety of specifications and models. If you want to know more about {keywords}, please follow us. The following is the parameter description of {title}. 3.6*10Time-Lag Type1000 is in production Axial strip LeadAC250V750mA.

TAP-T750MV2T02300BG

Product parameters

type	glass tube fuse
size	3.6*10
Voltage	AC250V
current	750mA
fuse time	Time-Lag Type
Minimum packaging quantity	1000 PCS
production status	in production
Installation instructions	Axial strip Lead

Product application

Laptop power management

In notebook computer power management, resistors are used for voltage division and signal conditioning. Through a combination of resistors with different resistance values, the power supply output voltage can be accurately adjusted to meet the needs of different hardware such as motherboards, graphics cards, and hard drives. In the power feedback circuit, resistors participate in building a voltage dividing network to feed back the output voltage change information to the power supply.

Gamepad button circuit

In the gamepad button circuit, the pull-down resistor is used to eliminate button jitter. When a key is pressed or released, due to mechanical structure reasons, a brief level instability will occur, that is, key jitter. The pull-down resistor stabilizes the button signal line at a low level when the button is not pressed. When the button is pressed, the signal line is pulled to a high level.

E-book reader backlight adjustment

In the e-book reader backlight adjustment circuit, the voltage dividing resistor realizes linear adjustment of the backlight brightness. By changing the resistance ratio of the voltage dividing resistor, the voltage provided to the backlight can be adjusted, thereby changing the backlight brightness. At the same time, the resistor participates in the feedback control of the backlight drive circuit, feeding back the backlight current information to the drive core.

Smartphone charging circuit

In the mobile phone charging circuit, the resistor plays the role of current limiting and protection. After the charger converts alternating current into direct current, the resistor prevents excessive current from damaging the battery and circuit components. When an internal fault in the charger causes abnormal current, a suitable resistor can limit the current in time to avoid the fault from expanding and ensure charging safety.

Related content

Glass tube fuse is a key component for protecting circuit safety 2025-01-10