TAP-T500MV2T02300BG glass tube fuse

{title} is a {keywords} product model of Walter. {keywords} is widely used and covers a variety of specifications and models. If you want to know more about {keywords}, you can follow us. The following is the parameter description of {title}. 3.6*10Time-Lag Type1000 is in production Axial strip LeadAC250V500mA (0.5A).

TAP-T500MV2T02300BG

Product parameters

type	glass tube fuse
size	3.6*10
Voltage	AC250V
current	500mA（0.5A)
fuse time	Time-Lag Type
Minimum packaging quantity	1000 PCS
production status	in production
Installation instructions	Axial strip Lead

Product application

Laptop power management

In notebook computer power management, resistors are used for voltage division and signal conditioning. Through a combination of resistors with different resistance values, the power supply output voltage can be accurately adjusted to meet the needs of different hardware such as motherboards, graphics cards, and hard drives. In the power feedback circuit, resistors participate in building a voltage dividing network to feed back the output voltage change information to the power supply.

Smart door lock motor drive

In the smart door lock motor drive circuit, the braking resistor absorbs the motor's counter electromotive force. When the motor is powered off or reversed, a back electromotive force will be generated, which may damage the drive circuit components. The braking resistor converts the back electromotive force into heat energy and consumes it to protect the safety of the circuit. The current detection resistor monitors the motor current in real time and feeds it back to the control core.

Smart watch heart rate monitoring

In the smart watch heart rate monitoring module, the resistor provides a stable working environment for the sensor. The bias resistor provides the appropriate bias voltage for the photoelectric sensor, so that the sensor can accurately detect changes in light intensity in the blood, thereby accurately calculating the heart rate. Resistors are also used in signal conditioning circuits to process weak signals output by sensors.

Gamepad button circuit

In the gamepad button circuit, the pull-down resistor is used to eliminate button jitter. When a key is pressed or released, due to mechanical structure reasons, a brief level instability will occur, that is, key jitter. The pull-down resistor stabilizes the button signal line at a low level when the button is not pressed. When the button is pressed, the signal line is pulled to a high level.

Related content

Glass tube fuse is a key component for protecting circuit safety 2025-01-10