MSH2512M2W0R003F alloy resistor

{title} is a {keywords} product model of Walter. {keywords} is widely used and covers a variety of specifications and models. If you want to know more about {keywords}, you can follow us. The following is the parameter description of {title}. 25120.003Ω (3mR) 2W±1%±50PPM4000 is in production.

MSH2512M2W0R003F

Product parameters

type	Alloy resistance Current sensing resistor
size	2512
Resistance	0.003Ω(3mR)
power	2W
Accuracy	±1%
temperature coefficient	±50PPM
Minimum packaging quantity	4000 PCS
production status	in production

Product application

E-book reader backlight adjustment

In the e-book reader backlight adjustment circuit, the voltage dividing resistor realizes linear adjustment of the backlight brightness. By changing the resistance ratio of the voltage dividing resistor, the voltage provided to the backlight can be adjusted, thereby changing the backlight brightness. At the same time, the resistor participates in the feedback control of the backlight drive circuit, feeding back the backlight current information to the drive core.

Bluetooth speaker volume control

In the Bluetooth speaker volume control circuit, the potentiometer is used as an adjustable resistor to adjust the audio signal amplitude by changing the resistance of the access circuit. Turn the potentiometer knob, and its moving piece slides on the resistor body, changing the ratio of the upper and lower voltage dividing resistors, thereby changing the voltage of the output audio signal and achieving stepless adjustment of the volume. same

Gamepad button circuit

In the gamepad button circuit, the pull-down resistor is used to eliminate button jitter. When a key is pressed or released, due to mechanical structure reasons, a brief level instability will occur, that is, key jitter. The pull-down resistor stabilizes the button signal line at a low level when the button is not pressed. When the button is pressed, the signal line is pulled to a high level.

Smart door lock motor drive

In the smart door lock motor drive circuit, the braking resistor absorbs the motor's counter electromotive force. When the motor is powered off or reversed, a back electromotive force will be generated, which may damage the drive circuit components. The braking resistor converts the back electromotive force into heat energy and consumes it to protect the safety of the circuit. The current detection resistor monitors the motor current in real time and feeds it back to the control core.

Related content