HFCL2512M2W0R002F four-terminal current sensing resistor

{title} is a {keywords} product model of Walter. {keywords} is widely used and covers a variety of specifications and models. If you want to know more about {keywords}, you can follow us. The following is the parameter description of {title}. 25120.002Ω (2mR) 2W±1%±100PPM5000 is in production.

HFCL2512M2W0R002F

Product parameters

type	Four-Terminal Current Sense Resistor Current sensing resistor
size	2512
Resistance	0.002Ω(2mR)
power	2W
Accuracy	±1%
temperature coefficient	±100PPM
Minimum packaging quantity	5000 PCS
production status	in production

Product application

digital camera flash trigger

In the digital camera flash trigger circuit, the resistor plays the role of current limiting and protection. At the moment of triggering, a large current will be generated in the circuit. The current-limiting resistor can effectively limit the size of the current and prevent excessive current from damaging the flash tube, transistors and other components in the trigger circuit. At the same time, the resistor participates in the formation and transmission of the trigger pulse

E-book reader backlight adjustment

In the e-book reader backlight adjustment circuit, the voltage dividing resistor realizes linear adjustment of the backlight brightness. By changing the resistance ratio of the voltage dividing resistor, the voltage provided to the backlight can be adjusted, thereby changing the backlight brightness. At the same time, the resistor participates in the feedback control of the backlight drive circuit, feeding back the backlight current information to the drive core.

Gamepad button circuit

In the gamepad button circuit, the pull-down resistor is used to eliminate button jitter. When a key is pressed or released, due to mechanical structure reasons, a brief level instability will occur, that is, key jitter. The pull-down resistor stabilizes the button signal line at a low level when the button is not pressed. When the button is pressed, the signal line is pulled to a high level.

Bluetooth speaker volume control

In the Bluetooth speaker volume control circuit, the potentiometer is used as an adjustable resistor to adjust the audio signal amplitude by changing the resistance of the access circuit. Turn the potentiometer knob, and its moving piece slides on the resistor body, changing the ratio of the upper and lower voltage dividing resistors, thereby changing the voltage of the output audio signal and achieving stepless adjustment of the volume. same

Related content