2020-T5A00V2T11192AM9G Micro Fuse

{title} is a {keywords} product model of Walter. {keywords} is widely used and covers a variety of specifications and models. If you want to know more about {keywords}, you can follow us. The following is the parameter description of {title}. 8.5*5*4Time-Lag Type1000 is in production SquareAC250V5A.

2020-T5A00V2T11192AM9G

Product parameters

type	micro fuse
size	8.554
Voltage	AC250V
current	5A
fuse time	Time-Lag Type
Minimum packaging quantity	1000 PCS
production status	in production
Installation instructions	Square

Product application

Smart door lock motor drive

In the smart door lock motor drive circuit, the braking resistor absorbs the motor's counter electromotive force. When the motor is powered off or reversed, a back electromotive force will be generated, which may damage the drive circuit components. The braking resistor converts the back electromotive force into heat energy and consumes it to protect the safety of the circuit. The current detection resistor monitors the motor current in real time and feeds it back to the control core.

Laptop power management

In notebook computer power management, resistors are used for voltage division and signal conditioning. Through a combination of resistors with different resistance values, the power supply output voltage can be accurately adjusted to meet the needs of different hardware such as motherboards, graphics cards, and hard drives. In the power feedback circuit, resistors participate in building a voltage dividing network to feed back the output voltage change information to the power supply.

Gamepad button circuit

In the gamepad button circuit, the pull-down resistor is used to eliminate button jitter. When a key is pressed or released, due to mechanical structure reasons, a brief level instability will occur, that is, key jitter. The pull-down resistor stabilizes the button signal line at a low level when the button is not pressed. When the button is pressed, the signal line is pulled to a high level.

Smartphone charging circuit

In the mobile phone charging circuit, the resistor plays the role of current limiting and protection. After the charger converts alternating current into direct current, the resistor prevents excessive current from damaging the battery and circuit components. When an internal fault in the charger causes abnormal current, a suitable resistor can limit the current in time to avoid the fault from expanding and ensure charging safety.

Related content