Detailed explanation of the complete table and diagram of chip resistor package dimensions

With the continuous upgrading and miniaturization of electronic products,Chip resistorAs a basic component in electronic components, the standardization and diversification of its packaging size has become particularly important. Learn about the various patchesresistanceThe package size not only helps to design a reasonable circuit board layout, but also improves the performance and reliability of the product. This article will systematically introduce the common package sizes of chip resistors, and help engineers and electronics enthusiasts quickly master relevant knowledge through detailed charts and data.

Chip resistor package size refers to the physical size of the resistor element housing, usually expressed in length and width. Common units are inches or millimeters. Clarifying the package size facilitates the automatic placement and soldering of components, as well as the rational design of circuit boards. Standardized sizes also ensure component interchangeability and supply chain stability.

The common chip resistor packages currently on the market are mainly divided into the following categories:

0201（0.6mm×0.3mm）

0402（1.0mm×0.5mm）

0603（1.6mm×0.8mm）

0805（2.0mm×1.25mm）

1206（3.2mm×1.6mm）

1210（3.2mm×2.5mm）

1812（4.5mm×3.2mm）

These sizes cover application needs from ultra-small to medium to large.

The larger the package size, the more power the chip resistor can typically carry. For example, the resistor power of the 0201 package is generally 1/20 watt, while the resistor power of the 1206 package can reach 1/4 watt or even higher. When designing, it is necessary to select the appropriate size according to the circuit power requirements to prevent component damage due to power overload.

Ultra-small 0201 and 0402 are suitable for mobile devices, smart wearables, etc. with extremely limited space.

Medium-sized 0603 and 0805 are widely used in household appliances and communication equipment.

Large 1206 and above are suitable for industrial equipment with large power or high heat dissipation requirements.

Choosing the appropriate package size can effectively improve product performance and production efficiency.

The following is a table of typical chip resistor package dimensions (unit: mm):

|----------|------|------|---------------|

| 0201 | 0.6 | 0.3 | 0.05 |

| 0402 | 1.0 | 0.5 | 0.063 |

| 0603 | 1.6 | 0.8 | 0.1 |

| 0805 | 2.0 | 1.25 | 0.125 |

| 1206 | 3.2 | 1.6 | 0.25 |

| 1210 | 3.2 | 2.5 | 0.5 |

| 1812 | 4.5 | 3.2 | 1.0 |

When selecting package size, the following points should be considered:

Board space limitations

Power load requirements

生产工艺和成本

产品的散热需求

综合评估后，选择既满足性能又便于生产的封装尺寸。

国际电子工业标准如JEDEC和IPC对贴片电阻尺寸进行了规范，保证全球电子产业的统一标准。这些标准帮助制造商和设计师统一设计语言，减少兼容性问题。

贴片电阻封装尺寸的多样性满足了不同电子产品的设计需求。通过了解和掌握各种尺寸的具体参数和应用场景，设计师可以更合理地布局电路，提高产品性能和可靠性。本文提供的贴片电阻封装尺寸大全表图及相关解析，为电子设计和采购提供了实用参考。未来，随着技术进步，贴片电阻的封装将更加微型化和高效化，推动电子产业持续发展。